Learn how to use the SLC2 controller
Does your app look different from the screenshots below?
Please, check this page instead: Quick-Start Guide to the SLC2 Controller - Android
You might be using our new Teleporte Android version.
With the SLC2 controller, customers have the ability to seamlessly integrate third-party electric locks into the Teleporte keyless ecosystem. By utilizing the Teleporte mobile application, users can conveniently access these electric locks, while administrators have the capability to monitor and manage accesses through the Teleporte web interface.
Please validate the basic requirements to use the Teleporte mobile application on this page.
SLC2 Controller Hardware
System Power Options
There are three options available to power the controller using an external DC source. These power inputs can be connected simultaneously, with priority given to the primary input first, followed by the backup input, and finally the emergency input. The emergency input can also be connected to the access pad accessory.
This means that the backup power source is utilized only when the primary input is unavailable, and the emergency power source is used only when both the primary and backup power sources are unavailable.
Installation and Wiring Example
Check the SLC2 installation manual for detailed information about the installation of the SLC2 controller. The diagram below shows an example of how the SLC2 controller can be wired to a standard third-party electric lock. In this case, the controller generates a 12VDC control signal to open the electric lock when authorized access has been granted.
Wiring Documents for electric locks
The following table presents examples of electric locks that can be integrated into the SLC2 controller. Please follow the recommendations in this document to select a third-party electric lock for your application.
| Lock Type | Brand | Model |
| Indoor Swing Handle | Southco | H3-EM |
| Indoor Swing Handle | Dirak | MLR 1000 |
| Outdoor Swing Handle | Dirak | MLE 1102 |
| Electric Strike | Camdem | CX-ED1309 |
| Electric Strike | Abloy | HES 5000 |
| RIM Electric Strike | Camdem | CX-ED1259L |
| Electric Deadbolt | Dirak | MLU 1004 |
| Electric Deadlatch | Adams Rite | Steel Hawk 4300 |
| Electric Rotatory | Southco | R4-EM-9D3-15A0 |
Mobile Application SLC2 Icons
When the controller is detected in the mobile application, the icons will provide further information about the status of the controller as shown in the image below.
How to open a lock with the SLC2 controller
If the user already has a key to unlock the lock, they should select the lock from the mobile application once it has been detected, and then choose the option to UNLOCK. Follow this guide to learn more about how to use the Teleporte Mobile Application to open locks.
